2019年7月18日星期四

How was the weekend of Hongdefa flour mill team?

Location: in Wutai County in Xinzhou Region, Shanxi Province, China
Destination: Mount Wutai
Area: 2,837 square kilometers (1,095.4 square miles)Average Altitude: 1,000 meters (over 3,281 feet)

The holiest land of Chinese Buddhism, Mount Wutai is rated on both the list of the first group of national scenic spots designated by the State Council and the list of the Top 10 scenic spots in Shanxi Province. It is as famous as Mt. Emei in Sichuan Province, Mount Putuo in Zhejiang Province, and Mount Jiuhua in Anhui Province, all of which are renowned as the four sacred Buddhist Mountains. Its five main peaks, positioned east, south, west, north, and in the middle, embrace one another with broad and plain terraces rather than forests on their tops. That is why it bears the name "Wutai Shan" (Mountain of Five Terraces). The summit of the northern peak which is famed as being the "Roof of Northern China", reaches 3061.1 meters (10,043 feet). Besides the religious aspect, the beauty of rising and falling ridges of mountains, exotic rocks, crisscrossed gullies, crystalline waters, and towering green forests also gives the mountain its reputation as a colorful and notable scenic resort.

Last week Hongdefa team took a trip to Mount Wutai and found that there were lots of travelers gathering when we arrived. It turned out July and August is the best time to travel Wutai Mountain, where the air is exceptionally cool, moody mountains make the dojo of the No.1 of the four famous Buddhist mountains into a fresh destination for “heat shelters + meditation + wishing + mountaineering + trekking'.
Ticket
Hongdefa team take the picture in Foguang temple
Our wishing place is precisely the well-known Wuye Temple on Mount Wutai. Wuye Temple is rather small, but there are indeed many pilgrims in Wuye Temple, which really made me a shock. The place with smoke is the door of Wuye Temple, and the White Pagoda Temple is just next to the Wuye Temple.

Wuye Temple is located inside the Wanfo Pavilion. There is a Dragon King wearing a golden robe and sitting in the hall of Wuye Temple is the famous Wuye.

People will burn incense early in the early morning in the temple without eating breakfast, tell their wishes to Wuye. Normally the wishes no more than 3 wishes and you should votive if the wishes come true.

Votive ways: hanging plaque, sent robes, supply the theater(this is the most solemn manner as seeing theater is one of the favorite habits of Wuye if your wishes come true)

Tips: We will fall asleep in the afternoon, so visiting his temple in the morning if you want to tell your wishes to him.

Taking pictures in front of Wuye Temple
White Pagoda Temple
The large temperature difference between day and night.
Wear cotton jacket in the morning and evening, Wearing a short T-shirt in the day.

In Summer, clouds in the air are close, humid and often rainwater happened times in one day.
Walking on the road in the raincoat
Scenery in night
Visiting local shops in the night of Mount Wutai
Hongdefa flour mill machine team
Now we are back to work with full of energy in Hongdefa.

Contact with us by tel/WhatsApp +86 139 03305 7265. if you are interested in automatic maize/corn/wheat flour mill machine with factory price in China.

2019年7月11日星期四

What needs Pay Attention to Flour Mill Machine In Summer?

Summer is a season of high temperature and high humidity, and it is also a period of frequent accidents in flour processing. How to do the technical adjustment and management of flour milling line is very necessary for the quality control of flour. Flour manufacturers should pay attention to the following matters:
Raw wheat in wheat flour mill machine
First, about the raw wheat
In order to meet the needs of production, some flour mill plant purchased large quantities of raw wheat, pay less attention to the quality of raw wheat, and brought some unqualified wheat into production. However, the quality of raw materials directly affects the quality of flour and its products. This unqualified raw wheat mainly includes worm wheat, germinated wheat, new wheat, and high-temperature wheat.


A.worm wheat

Processing flour with worm wheat will first reduce the rate of flour extraction. In addition, due to the metabolism and reproduction activities of aphids, some excretions and eggs are formed in the wheat. These active substances are more difficult to remove during the wheat cleaning process, resulting in poor color and frequent biochemical activities. Flour and its products have discoloration, odor, and reduced gluten quality.

B. Germinated wheat

When harvest wheat, due to excessive rain or not drying in time, some wheat granules are germinated or about to germinate, so that the flour sticky in the edible, the surface is pale and the edible quality of the flour is deteriorated.

C.New wheat

The newly harvested wheat needs a “post-maturing period” before processing. The general post-maturing period is above 3 months. In this process, the wheat will improve its quality through its own breathing and other activities. Otherwise, the wheat cannot be used for processing. The flour getting from the new wheat not only has a low yield, but also have poor color, poor gluten strength, and poor food quality, the steamed bread cannot afford, the sticky teeth, the noodles mixed soup, etc.

D.High temperature and moldy wheat

Flour quality is reduced from high temperature or mildew wheat. Moreover, in summer, because of high temperature and high humidity in the storage process, the wheat itself will starch hydrolysis, protein deterioration, mildew, etc., resulting in the wheat flour being black color, bitter, and even inedible.

processing of wheat
Second, about the processing of wheat

The high temperature and high humidity climate in summer, affects the processing effect of wheat, mainly in moisture, milling, and sifting of wheat:

A.moisture wheat

The moisture rate of wheat in summer do not need to be too high, around 14.5%- 15% is good. The degree of degradation of wheat under high-temperature conditions is closely related to water. The higher the moisture rate, the lower the temperature that causes the quality of the wheat to decrease, the higher the opposite. In summer, due to the heat dissipation of the wheat itself and the external environment temperature, the temperature of the wheat itself is relatively high. Therefore, it is necessary to control the time of wheat moisture. The moisture time is generally controlled 18-24 hours (due to differences in wheat quality). The wheat bin should be cleaned frequently. If it is not cleaned frequently or stopped for a long time without being cleaned, the wheat left in the bin for a long time will be mildewed or protein denatured due to high temperature and high humidity, thus affecting the edible quality of the flour.

B.milling wheat

In summer, the moisture content of the flour is high and the viscosity is high too. In the milling section, if the roller’s distance is not well adjusted, a layer of powder ring will adhere to the surface of the roller, and the roller phenomenon will occur, causing the radial rotation of the roller and affecting the milling process. Effect and flour quality. Therefore, the roller distance should not be too close, and the bottom section can be appropriately increased.

C.sifting of wheat flour

Sifting of wheat flour
Because the high humidity in summer and the wheat flour has strong hygroscopic characteristics, so in summer, flour sifting section often suffers from the opaque phenomenon due to the excessive moisture of the material, which may be caused by the backflow of the material. This will seriously affect the quality of normal production and finished products. Therefore, in summer, could consider reducing the output per unit time, reducing the material flow, or increasing the pore size of the screen to avoid this phenomenon.

Third, storage of wheat and flour

Storage of wheat and wheat flour
A. storage of wheat

In summer, the flour mill machine factory may receive some new wheat into the warehouse. Because of its frequent breathing and other biochemical activities during the storage process, the new wheat will cause a high temperature in the warehouse, coupled with high temperature and high humidity. The environment is very easy to cause protein deterioration and mildew in wheat. Therefore, the wheat storage work must be done well, shall strengthen the ventilation and turn off the bin.

B.storage of wheat flour

The hygroscopicity of flour also tends to cause agglomeration and mildew in the storage process. Therefore, the flour storage during this period should pay special attention to maintain good ventilation and suitable temperature. Wheat flour mill machine factory can use low temperature or hypoxia store. Moreover, it is necessary to avoid different batches, different grades of flour are mixed after packing, so as to avoid the exchange of moisture between them, and the storage time is long and often turned over.

For more wheat milling plants contact with us freely:

Mrs. Jane Liu for flour milling machines.
M: +86 139 3305 7265 (whatsapp/viber/imo/wechat)
www.hongdefa.com
www.hongdefamill.com

2019年7月4日星期四

L'équipe Hongdefa au salon Agritec Africa du Kenya

Bonjour, mon ami, je suis Liu Jian de hongdefa en Chine.
Le mois dernier Du 19 au 21 juin 2019, l'équipe de Hongdefa a participé à l'exposition internationale Agritec Africa qui s'est tenue à KICC Nairobi, Kenya.
Super Hongdefa Team au KICC
 Des usines de Chine, d 'Inde, d' Égypte, de Turquie et d 'autres pays ont participé à l' exposition et ont présenté différents produits.
Kicc
Pour nous montrer notre maïs et notre farine de blé fraiseuse.
Hongdefa décrochage à KICC
Le Kenya est vraiment un pays très beau en Afrique, en particulier en ce qui concerne le climat.
À l 'occasion d' une exposition de trois jours, l 'équipe de Hong - Dev s' est entretenue avec de nombreux clients au Kenya, au Zimbabwe, en Afrique du Sud, au Congo, au Mozambique et en Tanzanie.
Présenter nos broyeurs de maïs à des clients kényens
J 'ai le plaisir de présenter à nos clients nos machines à polir le maïs et le blé.Cette exposition a été très productive.Nous resterons en contact avec tous ceux qui ont besoin de machines à mouler le maïs et le blé.
Chaque année, nous allons souvent au Kenya, rencontrer de nouveaux clients et rendre visite à de vieux clients.
Minoteries à blé au Kenya
Fraiseuses à maïs au Kenya
Si vous êtes intéressé par les machines à mouler le maïs et le blé, contactez - nous à tout moment.
Notre équipe professionnelle vous apportera tout le soutien nécessaire au succès de votre entreprise.

Voici notre contact pour les ventes et le service après-vente.
Jane Liu
Téléphone: + 86 139 3305 7265
Courriel: Jane@hdfmill.com
Site Web: www.hongdefamill.com